26.04.2012, Первые слова Альпаки-3

Ребятенок заговорил:

Texas Instruments X-Loader 1.46 (May 11 2011 - 19:45:24)

U-Boot 2009.11 (May 30 2011 - 22:50:27)

OMAP34xx/35xx-GP ES1.0, CPU-OPP2 L3-165MHz

VAR-SOM-AM35xx Board + LPDDR/NAND

I2C: ready

DRAM: 256 MB

NAND: 256 MiB

In: serial

Out: serial

Err: serial

Die ID #2f5000010000000001685a201101d012

Net: davinci_emac_initialize

Ethernet PHY: GENERIC @ 0x00

DaVinci EMAC

VAR-SOM-AM35 #

Для получения результата был сделан шнурок, подключаемый с одной стороны к колодке J16 на baseboard, с другой стороны к USB-Serial хвосту. В Линухе появляется устройство:

ofei@Korogodin-Notebook:~$ ls /dev/ttyUSB0
/dev/ttyUSB0

Скорость по-умолчанию - 115200 бит/с.

Update 26.04 20:54

Линия TX тоже функционирует нормально:

VAR-SOM-AM35 # help

? - alias for 'help'
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dhcp - boot image via network using DHCP/TFTP protocol
echo - echo args to console
editenv - edit environment variable
exit - exit script
ext2load- load binary file from a Ext2 filesystem
ext2ls - list files in a directory (default /)
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fsinfo - print information about filesystems
fsload - load binary file from a filesystem image
go - start application at address 'addr'
help - print online help
i2c - I2C sub-system
imxtract- extract a part of a multi-image
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
ls - list files in a directory (default /)
md - memory display
mm - memory modify (auto-incrementing address)
mmc - MMC sub-system
mtest - simple RAM read/write test
mw - memory write (fill)
nand - NAND sub-system
nandecc - switch OMAP3 NAND ECC calculation algorithm
nboot - boot from NAND device
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
showvar - print local hushshell variables
sleep - delay execution for some time
source - run script from memory
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
version - print monitor version

VAR-SOM-AM35 # ls /

Scanning JFFS2 FS: done.

VAR-SOM-AM35 # bdinfo

arch_number = 0x00000898
env_t = 0x00000000
boot_params = 0x80000100
DRAM bank = 0x00000000
-> start = 0x80000000

-> size = 0x10000000
DRAM bank = 0x00000001
-> start = 0x80000000
-> size = 0x00000000
ethaddr = F8:DC:7A:00:00:00
ip_addr = 0.0.0.0
baudrate = 115200 bps

Статья на вики отвечает на вопрос "Что такое JFFS2?"

— Корогодин Илья • 19:30, 26 апреля 2012 • нет комментариев